Sound Adjustments; Adjusting The Volume - MAC Audio MAC 620 Bedienungsanleitung

sounD ADjustMents

Adjusting the Volume

To adjust volume, rotate the volume knob on the front panel.
Mute
During playback, press the VOLUME knob on the panel or [
sound will mute. To resume sound, press the button again.
selecting equalizers Presets
1. Touch [ ] on the screen. The current Equalizer setting is
displayed.
2. You can select one of the following preset equalizers:
∙ [User]
∙ [Techno]
∙ [Rock]
∙ [Classic]
3. Touch [ Reset ] to restore the above settings into default settings.
4. Touch [ ] to exit.
Adjusting fAD BAl
You can adjust front/back/left/right balance of the speaker and the subwoofer volume to get
larruping listening effect according to the surroundings and your
interest.
1. To enter the EQ setup mode:
Touch the [ ] icon in the user interface and the EQ setup
interface will display on the screen.
2. Adjusting subwoofer volume
Touch [ ] / [ ] or drag [
from -12 to +12.
3. Adjusting fader/balance value
Touch [ ] / [ ] / [
-20 to +20.
[ ]: Front speaker
[ ]: Rear speaker
[ ]: Left speaker
[ ]: Right speaker
∙ [Jazz]
∙ [Optimal]
∙ [Pop]
∙ [Flat]
] to adjust the subwoofer volume
] / [ ] to adjust fader / balance value from
] on the screen (if available), the
47