Receiving A Call; Music Mode - MAC Audio MAC 620 Bedienungsanleitung

receiving a Call

1. If there is an incoming call, the screen will appear "Incoming".
2. You may touch the screen to select [ hang up ] or [ Answer ].
Speak into the Bluetooth microphone.
note:
You can select to receive calls automatically by set [Auto answer]
to [On] status.
Adjusting Bluetooth settings
1. In Bluetooth menu, touch [
2. Touch on the selected option to change the setting.
• [Bluetooth]: To turn on or off "Bluetooth" function.
• [Auto connect]: To turn on or off "Auto connect" function
• [Auto answer]: To turn on or off "Auto answer" function.
• [Pairing code]: To set paring code.
• [Phone book sync]: To synchronize phone book, touch
[OK] on the sub-menu popped out.
Phonebook sync may take several minutes to load on initial
setup.
note:
You can also adjust Bluetooth settings in the "Settings" menu.

Music Mode

A2DP
A2DP is short for Advanced Audio Distribution Profile. The mobile
phones supporting this function can transmit stereo audio.
AVrCP
AVRCP is short for Audio/Video Remote Control Profile. The
mobile phones supporting this function can control the playback
of a Bluetooth audio player.
In the mode of the music player working, if you want to make a
phone call, you can press the number keys on the mobile phone.
At the same time the music player will stop. On the screen
will appear "Calling". After receiving the call, the voice will be
transferred to the unit. When the call ends, the music player
menu appears on the screen.
If there is an incoming phone call, the music player will stop, and
"Incoming" appears on the screen. When the call ends, the music
player menu appears on the screen.
]. The option menu is displayed.
46