Usage - Tenneker Halo TG-3 Gebrauchsanweisung

Usage

CAUTION
Use oven mitts to avoid burns and
splatters. Use protective gloves
when handling hot components.
1. Remove the grill spit before heating
up the grill. Use protective gloves.
2. Unscrew and remove the fork on the
motor side of the spit.
3. Take care to centre the grillables
on the spit. Otherwise the grill spit
would speed up, when the heavier
side turns downward.
4. Re-attach the second fork and fix its
wing bolt.
5. Mount the grill spit onto the motor
and support. Use protective gloves.
6. To keep the handle from heating up,
you may unscrew it before grilling.
7. Plug the power cord into a suitable
wall socket.
54 | ENGLISH
8. Turn on the motor.
9. Only Halo TG-5 when using the rear
burner: The grillables should turn
upwards at the rear burner side to
avoid losing the gravy coming from
the grillables.
If necessary, change the rotation
direction by turning the motor off
and on again.
10. Make sure that the grillables are
sufficiently heated (e.g. with a roast
thermometer) before removing
them from the grill.
11. Turn off the motor and pull the
power cord. Use protective gloves
when removing the spit from the
grill. Screw the handle to the open
end of the grill spit. Lift the spit at
the handle and by its motor from
the support. Keep the motor pushed
against the spit.
12. Make sure nobody gets injured by
the hot grill spit or dropping gravy.