Functions And Features - Agilent U1253B Schnellstartanleitung

All manuals and user guides at all-guides.com
• Upon initial use (or after a prolonged storage period), the
CAU TI O N CAU TI O N
rechargeable battery may require three to four charge/discharge
cycles before achieving maximum capacity. To discharge, simply
run the multimeter under the rechargeable battery's power until
it shuts down or the low battery warning appears.
• The multimeter may indicate that charging is complete after ten
minutes when charging a new rechargeable battery. This is a
normal phenomenon with rechargeable batteries. Remove the
rechargeable battery from the device, reinsert it, and repeat the
charging procedure.

Functions and Features

Action
Changes the OLED brightness
Freezes the measured value
Starts MIN|MAX|AVG|NOW
recording
Offsets the measured value
Changes the measurement range
Turns on auto range
Turns on dual display
Starts manual data logging
Views the logged data
Clears the logged data
Your multimeter is capable of remote data logging. To use this
NO TE
feature, you will need an IR-USB cable (U1173A, purchased
separately) and the Agilent GUI Data Logger Software
(downloadable from
Steps
.
Press
.
Press
Press and hold
.
Press
.
Press
Press and hold
.
Press
Press and hold
Press for > 1 s, press
to scroll through the logged data.
Press for > 1 s, press
for > 1 s.
www.agilent.com/find/hhTechLib).
U1253B Quick Start Guide
for > 1 s.
for > 1 s.
for > 1 s.
or