Safety Related Information On Taking Out Of Operation And Removal; Liability And Exclusion Of Liability; Technical Specifications - Herz HD140 Betriebsanleitung

5.6 Cleaning
There is a high risk of injury on the inside of the device due to
rotating parts during operation. Decommission the device in all
cases and wait until all moving parts have stopped before
opening, reaching in or inserting tools into the device. Secure the
device reliably against it being accidentally restarted during the
entire period.
Also make sure that no other dangerous situation can arise
when restarting after a standstill, e.g. as a result of a power
failure or blockages.
Cleaning or maintenance must not lead to damage or
modifications to the device and its components that would
influence safety or health protection and, for example, impair the
balanced state of the impeller.
When starting up the side channel blower, make sure that all
tools or other foreign objects have been removed from inside the
device and that all covers and protective grilles have been
attached correctly.
6.0. SAFETY RELATED INFORMATION ON TAKING OUT
OF OPERATION AND REMOVAL
The disconnection of all electrical connections and any other
electrical work in connection with decommissioning must only be
carried out by a qualified electrician.
The device should be dismantled only when all rotating parts
have come to a standstill and cannot be restarted.
The guidelines set out in 2.1 Transport and Handling must be
observed when dismantling and removing it.
Treat the device as industrial waste when disposing of it.
The device parts are made of recyclable material, such as
aluminium, (stainless) steel, copper and plastic. However, there
are components that need special treatment (e.g. frequency
converters). The statutory national and local disposal and
recycling regulations must be observed.

7.0. LIABILITY AND EXCLUSION OF LIABILITY

The owner shall bear the responsibility for the correct use of the
device.
HERZ shall not accept any liability for any use of its products
and components which is contrary to their intended use.
This shall also apply in particular to use in special applications
and under operating conditions that have not been specifically
HERZ
agreed with .
HERZ shall not accept any liability for any modifications or
alterations to the device or accessories supplied.
Likewise, HERZ shall not be liable for improper, delayed,
neglected maintenance. Neither shall it be liable for any cleaning
and repair work not carried out by qualified
nor for the possible consequences.
BA HD140 V30 R20 07_2021 DE-GB.doc
HERZ specialists,
Technische Änderungen vorbehalten / Technical changes reserved
8.0. TECHNICAL SPEZIFICATIONS
Type: Blower
m³/min Pa
200 – 255
1,5 14000
346 – 440
200 – 277
1,6 14000
346 – 480
rpm KW
2845 0,42
3435 0,52
Suction opening
Outlet opening
Dimension (LxWxH)
Ambient temperature.
Protection type
Optional 1 x 230V
V Hz A
1,73 – 2,10
50
1,20 – 1,65
2,40 – 2,70
60
1,00 – 1,20
LpA(db) KG
64 – 73 11,3
69 – 76 11,3
: Ø 38 mm (outside)
: Ø 38 mm (outside)
: 283 x 244 x 266,5mm
: -20°C bis +60°C / -4°F to 140°F
: IP 54
: Capacitor 230V; 16/450µF/V
: Capacitor 230V; 16/480µF/V
15