Filling Of Drinking Water; Water Taking And Drinking; Instructions For Water Dispenser Disassembly And Cleaning; Disassembly - Candy CMICN 5184XN Bedienungs- Und Installationsanleitung

Filling of drinking water:

Open the water tank cover and directly fill the water;

Water taking and drinking:

1. Push the handle by using a glass;
2. The water flows out when the handle is pushed and the outflow stops when the handle
returns to the original place;
Attention:
1. If the water in the tank is not used for long period, it is suggested to change it
2. If the water dispenser is used for the first time or it has not been used for a long period,
disassemble and clean it before use;
3. In case of failure of water taking, please check if the water box is normally located on its
base;

Instructions for water dispenser disassembly and cleaning

Attention:
1. Only purified water and cool water without any impurities can be used for water
dispenser.
2. The water refill by taking down the water box from the door is not allowed;
3. The water level shall be lower than the level indicated on the water box
Upon opening/closing the door, do not apply excessive force to prevent water
overflow.

Disassembly

1. Take out the water tank components by pulling towards you the tank, with an
inclination of 45° upward. When the lower parts of
water tank components are separated from the water
valve components, they can be taken out through
horizontal movement in the direction of the user;
2. Take down the sealing ring of the water tank
16