Replacement Parts; Technical Specifications - Status PA125CE Originalbetriebsanleitung

MAINTENANCE

TECHNICAL SPECIFICATIONS

CLEANING
For safe operation always keep the machine and its ventilation slots clean.
Regularly check to see if any dust or foreign matter has entered the ventilation slots and the
grills around the switches. Use a soft brush and/or air jet to remove any accumulated dust.
Wear safety glasses to protect your eyes whilst cleaning.
Exterior plastic parts may be cleaned with a damp cloth and mild detergent if necessary.
WARNING!
Never use alcohol, petrol or other cleaning agent. Never use caustic agents to
clean plastic parts. Water must never come into contact with the tool.

REPLACEMENT PARTS

To assure product safety and reliability, repairs, maintenance and adjustment (including
brush inspection and replacement) should be performed by authorised service centres
always using genuine replacement parts.
TECHNICAL SPECIFICATIONS
Model
Voltage
Input power
No load speed
Backing pad Ø
Weight
А-weighted sound pressure level LpA
А-weighted sound power level LwA
Vibration emission value ahb/ahm
Protection class
Includes:
Backing pad 75 mm, Backing pad 125 mm, auxilliary handle (2).
The manufacturer reserves the right to make changes and improvements to the products and to
alter specifications without prior notice.
EN
77.6 db(A), uncertainty 3 dB(A)
88.6 dB(A), uncertainty 3 dB(A)
5.99 m/s 2, uncertainty 1,5 m/s 2
8
PA125CE
220-240 V~ 50 Hz
750 W
800-2500/min.
75 and 125 mm
2,4 kg
II