Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Indicator light:
1. Natural mode indicator
2. Sleeping mode indicator
3. Oscillation
4. Mist volume indicator: minimum-medium-maximum
5. Timer
6. Speed: low-medium-high
7. Power on indicator
Buttons:
A. ON/OFF
B. SPEED
C.MODE
D.TIMER
E.OSC(Oscillation)
F. MIST
Humidify function
•
Remove the water tank from the host, and unscrew the water tank cap counter-clockwise.
•
Fill the water tank with cold water (The water must not be warmer than 40°C.), tighten the
water tank cap and check for leakage.
Loosen
Tighten
•
As is shown, put the water tank into the host according to the angle, and wait a few minu-
tes until the host sink is filled with water.
•
After the humidify button is pressed, the indicator lights up to start humidify.
•
Note: If the indicator flashes (off after 10 seconds), it indicates insufficient water or low
water level, please check whether the float in the sink of the host has floated or the water
tank is properly placed.
•
NOTE: Always drain the main unit before transport. Remove the spring clamp and drain
plug, and clear the machine of the remaining water.
Werbung
Inhaltsverzeichnis
