System Time - Jago Rmtms01 Bedienungsanleitung

DE FR EN EN
s
ystem time
How to set the system time: Keep pressing for 5 seconds,it will enter into the time
setting. The current revisable object will flash and display. Press and choose time you
want to revise (week / hour / minute), press or to modify the current setting. If you
need to modify the previous parameters, please press key. After the modified minutes
you can press to exit the system clock settings.
a /
utomatiC manual sWitCh
Press you can choose the manual mode or automatic mode.
Manual mode: System will control temperature under the set value without any change.
Automatic mode: System would control temperature according to the preset
temperature values in different time. The icon will lit, which means that the system
is running under automatic mode. The week and Stage icon would alternately display
every 5 seconds, 1-7 is systematic reuse. When screen shows WEEK, 1-7 would display
the values of the week. When screen shows STAGE, 1-6 would display the current values.
s
etting the periods of time modes
The thermostat can't quit when you set the periods and it will automatically save data
and exit when all setting is finished.
The periods setting can realize the control of temperature and time under automatic
mode. Once setting up, the values could be saved and reused in the thermostat forever.
The thermostat can save three kinds of schedules (5+2 / 6+1 / 7) in 6 periods; One week
for a cycle.
Each data is saved as the start time (hours: minutes) and the temperature values of this
period. The end time of the period would be saved as the start time of next period. You
can also shut down a certain period according to your needs.
29