Aus Transportgründen werden die Rücken demontiert geliefert. Zur
Montage beachten Sie bitte nachfolgende Schritte.
Benötigtes Montagematerial liegt bei:
1 Inbusschlüssel
For transport reasons, the back are supplied dismantled. For installation
please note the following steps.
Needed mounting material enclosed:
1 Allen key
Stellen Sie das Sofa aufrecht.
Put the sofa in its upright position.
Drehen Sie die Schrauben (2 x
Halbrundkofpschraube 8x30 pro
Rücken inkl. 2 x Unterlegscheibe
10,5 pro Rücken) aus den Bolzen an
der Rückenunterseite heraus. Legen
Sie nun die Rücken auf die Sitz-
fläche. Achten Sie darauf, dass die
farblichen Markierungspunkte
übereinstimmen.
Turn the already inserted screw (2 x
half-round screw 8x30 per back incl.
2 x washers 10,5 per back) out of
the bolt. Now lay the back onto the
seat surface. Be sure that the colored
marking points are confirm.