Cleopatra 90156901 R04 Montage- Und Wartungsanleitung Seite 25

Installation
Step 8 : apply a bead of polymer sealant inside the markings on the floor (from step 6). Leave any spacers in the correct
position on the floor.
Step 9 : Clean the underside and sides of the corner element as prescribed on the sealants package.
Do not use alcohol or other chemical substances to clean the acrylic elements.
Position the corner element.
Make sure that the two hooks at the rear of the corner element engage properly in both wall brackets.
Step 10 : clean the underside and sides of the straight seat element as prescribed on the sealants package.
Do not use alcohol or other chemical substances to clean the acrylic elements.
Position the corner element.
Make sure that the two hooks at the rear of the corner element engage properly in both wall brackets.
10