Cleopatra 90156901 R04 Montage- Und Wartungsanleitung Seite 19

Preparation prior to installation
The installation manual explains the main installation steps and contains the main
installation instructions
for the product identified on the front page. Read the installation manual carefully in order to avoid
installation errors. Incorrect installation may lead to incorrect product function, damage and/or injury. Keep
the installation manual in a safe place. Where applicable, give it to the next owner/user
The Seat elements may only be installed in a structural steam cabin or Cleopatra Proline steam cabin.
Preparation prior to installation; The floor must be level, clean and flat. Wall(s) must be flat and
wall corners must be square in order to ensure a correct fitting of the seat elements to the wall(s). If the
walls are to be tiled, this must take place before the seat elements are installed. Important note! If the tiles
are installed around the periphery of the seat elements, they can no longer be removed at a later date.
Safety: Be careful not to injure your hands when performing operations where this warning symbol is used.
There is a risk that your hands may be pinched or injured in some other way. It is preferable to wear
safety gloves while handling seat elements.
The plugs supplied in the kit are intended for use in concrete/solid stone walls.
If the walls are made from a different material, you should use wall plugs that are suitable for the type of wall concerned.
These plugs are not included in the scope of supply.
Tip! The seat elements should be installed by a two-man team!
Do not allow ammoniac or any other type of aggressive cleaning agents that are used to clean tiles to come into contact
with the seat elements.
The seat element(s) should be carried to the place where it (they) will be installed before carefully removing the protective packaging.
4