Cleopatra 90156901 R04 Montage- Und Wartungsanleitung Seite 23

Installation
Step 5: Position the straight seat element so that it butts up to the corner element. The floor under the element must be
perfectly clean. Also clean the flanges at the bottom of the seat element as prescibed on the sealants package.
Do not use alcohol or other chemical substances to clean the acrylic elements. Make sure that the two hooks at
the rear of the seat element engage properly in both wall brackets. The gap relative to the wall can be adjusted by the altering height
of the wall bracket.
Please note: the seat element must be supported on the floor and may not hang from the wall brackets! If necessary,
use spacers under the seat element to level it. The top faces of the seat elements must be at the same height relative to each other.
This is important as it affects the tilling that will take place later.
8