Eu Declaration Of Conformity - Rodcraft Rc7915 Bedienungsanleitung

Safety Information
Technical data
Tool data
Weight (kg)
Tank capacity (l)
Number of Stages
Number of engines
Engine Type (V-Hz)
2
Filtration Surface (Cm )
Cooling type
3
Air Flow (m /h)
Depression (mmH O)
2
Degrees of Protection
Max. Power (Kw)
Max. Power of the tool (Kw)
Sound Pressure Level (dB(A))
Declarations

EU DECLARATION OF CONFORMITY

We, Rodcraft, Rodcraft Customer Center, Langemarckstr.35
bis, 45141 Essen, Germany, declare under our sole responsi-
bility that the product (with name, type and serial number,
see front page) is in conformity with the following Direc-
tive(s):
MD, 2006/42/CE, EMC, 2014/30/UE, LVD, 2014/35/UE,
WEEE, 2012/19/EU, RoHS, 2011/65/CE
Harmonized standards applied:
EN ISO 12100:2010, IEC
60335-1:2010+A1:2013+A2:2016, IEC 60335-2-69:2016,
IEC 62233:2005, EN 55014-1:2006+A1:2009+A2:2011,
EN 55014-2:2015, IEC 61000-3-2:2014, IEC
61000-3-3:2013, EC 61000-3-11:2000
Authorities can request relevant technical information from:
Pascal Roussy, R&D Manager, Ets Georges Renault, 38 rue
Bobby Sands, BP10273 44818 Saint Herblain, France
Saint-Herblain,
Pascal ROUSSY
Signature of issuer
6
RC7915
39
35
2
1
220-240 50/60
2500
By pass
230
2600
IPX4
1.7
1.7
60
© Rodcraft - 8956001726
Safety
WARNING Risk of Property Damage or Severe In-
jury
Ensure that you read, understand and follow all instruc-
tions before operating the tool. Failure to follow all the
instructions may result in electric shock, fire, property
damage and/or severe bodily injury.
Read all Safety Information delivered together with
►
the different parts of the system.
Read all Product Instructions for installation, opera-
►
tion and maintenance of the different parts of the
system.
Read all locally legislated safety regulations regard-
►
ing the system and parts thereof.
Save all Safety Information and instructions for fu-
►
ture reference.
Statement of use
The machine is designed for the extraction of dust and ma-
chining residues.
No other use permitted. For professional use only.
Any other use is considered improper and therefore a source
of danger, as they can cause serious damage to property and
people as well as the machine itself.
Product specific instructions
Control station
The machine is equipped with a control station from which
an operator has the ability to manage all the machine func-
tions. (See figure 8)
0 =>Three position switch : AUTOMATIC-0-MANUAL
1 => Electric socket for not included electric accessory.
Connection to the main power
Make sure the network specifications match those of the ma-
chine, after ascertaining that they have a power source com-
patible with the machine proceed as follows:
1. Ensure that the 0 switch is switched 0.
2. Take the plug and connect it to the network socket.
3. Connect the desired accessory.
4. The machine is ready to be started.
Filter mounting
1. To mount the polyester filter class "L" insert the filter
on motor base as shown in figure 4.
2. fasten the wing nut.
3. Position the filter tightener, fasten the 4 screws (see fig-
ure 5).
4. To remove the filter follow the previous step in the op-
posite way.
Dust Extraction Unit