Installation; Operation - Samoa 167 500 Bedienungsanleitung Und Teileliste

EN
DESCRIPTION
High pressure (60:1 Ratio) compressed air operated grease gun. Especially indicated for use with hard grease and at low
temperatures thanks to its air operated follower. The gun can be connected to a fixed compressed air line or to a truck circuit. The gun includes a
1000 cm 3 container for bulk grease, flexible outlet hose and 4-jaw connector.

INSTALLATION

1. Connect the hose to the outlet of the gun and tight it well.
2. Connect the gun to a compressed air line (the use of quick coupler and connector is recommendable). The air pressure must be between 3 and
10 bar, and 6 bar is ideal.
NOTE: An air closing valve must be installed, in order to be able to close the compressed air line at the end of the day.

OPERATION

FILLING THE GREASE CONTAINER
The grease container can be filled manually or using a grease gun filler pump. To fill it with grease filler pump, connect the gun to the pump as
showed in fig. 1. To fill the container manually, disconnect the quick coupler and unthread the container. Push the piston down to the bottom of
the container and fill it with grease. Put back the filled container and connect the quick coupler.
(Fig a-b-c-d).
To begin to use the grease gun, connect it to the air line and action the trigger repeatedly until grease appears in the outlet.
Fig. 1
2
816 801 R. 10/19
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
Fig. a
Fig. b
Fig. d
Fig. c