Herunterladen Inhalt Inhalt Diese Seite drucken

Operating The Device; Cleaning And Maintenance; Technical Data; Technical Details - Superior RD 40I Bedienungsanleitung

Standventilator
Vorschau ausblenden Andere Handbücher für RD 40I:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

OPERATING THE DEVICE

1. Plug the device into the mains.
2. By loosening the blocking ring on the pedestals, the inner tube can be adjusted to the desired
height. Subsequently, ensure the blocking ring is resecured in place.
3. By loosening the side impeller screw under the motor, the tilt angle of the impeller blades can be
adjusted. When you have reached the desired angle, secure the impeller screw back in place.
4. The device offers the following functions:
• Slow speed
• Medium speed
• Fast speed
• Horizontal motor swing with impeller blade
5. Press the "on / speed" button. The fan starts at a low speed. The speed can be altered by further
pressing the "on / speed" button. The chosen speed is then indicated via a red light next to the
specified speed, namely "low" (slow), "mid" (medium) and "high" (fast).
6. The swing function is operated by pressing the "swing" button. The swing function can only be
activated while the fan is in operation. Pressing the "swing" button again stops the function. The fan
remains in the new setting.
7. If you wish to switch the fan off manually, press the "off" button.

CLEANING AND MAINTENANCE

Caution:
Before cleaning, always unplug the device from the mains.
• The device, power cord and plug must not be soaked in water or other liquids during cleaning.
Clean these parts using a dry cloth.
• When very dirty, the outside of the device can be wiped off carefully with a damp cloth and
subsequently carefully dried. Be careful when doing so that no moisture gets inside the device.
• Do not use any harsh cleaning agent, wire brushes, abrasives or other hard objects to clean which
could scratch the surfaces.
• Clean the device regularly.
• Never use solvents, petrol or oil-based cleaners, since these could damage the housing.

TECHNICAL DETAILS

Model
RD 40I
Voltage
220-240V~ 50 HZ
Rated output
50Watt

WASTE DISPOSAL ADVICE

• Electrical appliances should not be placed with household trash. It has been specified by
law that old appliances must be disposed of via public community collection centres or
bulky waste collection.
• This is the only way to ensure that old appliances are disposed of professionally and
utilized.
9 9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis