Technical Specifications - Rollei Remote Shutter Anleitung

3. Operation
10
1. Insert the camera release cable into the 2.5 mm cable socket of the shutter
release and into the corresponding port of your camera.
2. Half press the shutter release button to focus.
3. Fully press the shutter release button to take a picture.
4. Locking mode: Please set the camera to continuous or BULB mode. Fully press
the shutter release button and lock the button by sliding it up. As soon as the
button is pressed and locked the camera will start to do a continuous shooting
or a long exposure one. To stop the recording press the release button and slide
it down again.
4. Note
1. Remove the camera release cable when the product is not used for a long time.
2. When the shutter release cable is connected to the camera, please do not pull
and drag the cable.
3. The product does not need a battery for power supply. It gets the power from
your camera.

5. Technical specifications

Modes
Shutter Port
Size
Weight
Operating Temperature
Storage Temperature
Technical details are subject to change without notice. Misprints and errors excepted.
Reproduction of these operating instructions – even in part – is not permitted.
Single shooting, continuous shooting, long exposure
2,5 mm
96 x 30 x 20 mm
22 g
-15°C ~ 65°C
-30°C – 85°C
ENGLISH