Herunterladen Inhalt Inhalt Diese Seite drucken

Instruções De Segurança Importantes - NGS FORTRESS BUNKER Handbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
MANUAL DO UTILIZADOR
INSTRUÇÕES DE SEGURANÇA
IMPORTANTES
Este manual contém informação importante acerca da segurança.
Siga atentamente todas as instruções durante a instalação. Leia este
manual completamente antes de desembalar, instalar ou utilizar.
PRECAUÇÃO
Para evitar o risco de incêndio ou electrocução, instalar
nuna zona de interior a temperatura e humidade
controladas, livre de conductores contaminantes.
PRECAUÇÃO
Perigo de electrocução, não retirar a coberta. O interior
do aparelho não inclui componentes que o usuário
possa manipular. Deverá recorrrer a pessoal qualificado
para qualquer manipulação.
PRECAUÇÃO
Risco de electrocução, os componentes perigosos
no interior deste SAI podem receber alimentação da
bateria mesmo quando está desligado da rede de CA.
PRECAUÇÃO
Risco de electrocução, o circuíto da bateria não está
isolado da entrada de CA; pode existir uma voltagem
perigosa entre os terminais da bateria e a tomada de
terra. Comprovar antes de tocar.
ADVERTÊNCIA Producto SAI de Classe A. Num ambiente doméstico,
este producto pode provocar interferências de rádio,
neste caso, o usuário poderá ver-se obrigado a tomar
medidas adicionais.
ATENÇÃO
O SAI foi desenhado para ser utilizado unicamente com
computadores.
ATENÇÃO
Para evitar lesões, não transporte o SAI com a asa da
cobertura dianteira.
22
OBSERVAÇÕES RELATIVAS À
SEGURANÇA
In order to keep safe in using the UPS, please comply with the
following:
• Please charge the battery at least 12 hours before the UPS is in
operation.
• After the battery is discharged or over three months withou t
operar ion, t he ba ttery should be charged immediately for at least
12 hours, ensuring the battery is full and avoiding any unnecessary
damage of the battery.
• When AC fails and the ON button on the front panel is pressed,
the UPS will output voltage; if the OFF button on the front panel is
pressed, the UPS will not output voltage.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis