Herunterladen Diese Seite drucken

Gerlach Germany GL 6412 Bedienungsanleitung Seite 6

Werbung

9.
With a slightly damp cloth you can clean the heating element. Do not use any detergent.
10.
Remove the collection box and clean it with a damp cloth and remove any liquid that has collected inside.
11.
Let all the parts dry before assembly.
12.
Store in a dry and cool place.
WARNING:
Do not modify, disassemble or repair the product by yourself.
Do not place the product in water to clean.
Do not use inner pot in any other way than intended by the producer. You cannot use it directly on any heat source besides the pressure
cooker.
Do not lift or move the device during cooking
The inner pot is to be used with plastic or non-scratching cooking utensils and cleaning products.
Ensure that the heating element, temperature sensor and inner pot outside is clean and dry before connecting to mains power supply,
impurities or foreign matter may cause malfunction of electric pressure cooker.
Never damage, cut, remove, replace the rubber seal ring or tension seal ring. Doing so can cause malfunction or damage to the user.
If a large amount of steam is emanating from the device with the pressure valve is closed indicates a malfunction. Please turn off the device
from mains power. Let it cool down, and inform the seller for maintenance or repair.
When transporting please use the side handles on the sides of the device and NOT the lid handle. The lid handle is only used for opening
and closing the device.
Troubleshooting:
Hard to close lid:
Reason 1: Seal ring not placed well. How to fix: Make sure the seal ring on the underside of the lid is placed well.
Reason 2: Float valve is stuck How to fix: move the lid left and right a few times or push the float valve with your finger. If it does not work
please contact the seller for maintenance.
Hard to open the lid:
Reason: The float valve did not release. How to fix: Move the lid slightly from left to right. If it does not work release more steam by gently
pressing the pressure release valve upwards until you hear a *Click* sound.
!!WARNING!! This will release hot steam. Use a wooden spoon or chopstick to release the pressure and not get burned.
Leaking lid:
Reason 1: Seal ring not placed well. How to fix: Make sure the seal ring on the underside of the lid is placed well.
Reason 2: Food residue stuck on seal ring. How to fix: Clean the seal ring.
Reason 3: Seal ring broke. How to fix: Replace seal ring.
Reason 4: Lid not closed well. How to fix: Close the lid correctly.
Pressure Valve leaks:
Reason 1: Food residue stuck on the pressure valve seal ring. How to Fix: Clean the valve seal ring.
Reason 2: Pressure valve seal ring broken. How to fix: Change the pressure valve seal ring.
Float valve not working:
Reason 1: Food residue stuck on the float valve seal ring. How to Fix: Clean the valve seal ring.
Reason 2: Pressure valve seal ring broken. How to fix: Contact the seller for maintenance and repair.
Continuous exhaust of pressure during work:
Reason 1: Pressure limiting valve not set in sealed position. How to fix: Set pressure limiting valve in sealed position.
Reason 2: Too little water or food in the pot. How to fix: Add water or more food.
Reason 3: Pressure switch break. How to fix: Contact the seller for maintenance and repair.
Errors on display:
E1 – Bottom temperature sensor broken. How to fix: Contact the seller for maintenance and repair.
E2 – Bottom temperature short circuit. How to fix: Turn off, let cool, turn on again. If it does not help. Contact the seller for maintenance and
repair.
E3 – Temperature too high, not enough water in inner pot. How to fix: Turn off, let cool, turn on again. Add water. If it does not help. Contact
the seller for maintenance and repair.
E4 – Pressure switch failure. How to fix: How to fix: Turn off, let cool, turn on again. If it does not help. Contact the seller for maintenance
and repair.
Technical details:
Capacity: 6L
Input Voltage: 220-240V~ 50/60 Hz
Power: 1000W
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
6

Werbung

loading