Inhaltsverzeichnis
Werbung
First Time Installation
USB
To access the Menu, press the
,
SETUP
Multi-Media
Switch to USB mode and plug in USB to view files.
Technical Specifications
Item
Sub Item
Parameter
170~230MHz
Input Frequency
470~860MHz
Tuner
-79dBm(T),-75dBm(T2)
RF Input level
IF Bandwidth
7MHz and 8MHz
Modulation
QPSK,16QAM,64QAM,128QAM(T2),256QAM(T2)
MPEG4 AVC/H.265 HP@L4
Decoder Format
MPEG2 MP@ML.HL
Video
Output Format
480i, 480p,576i, 576P, 720P, 1080i, 1080P,4:3 and 16:9
HDMI
Output Port
button and select USB.
.
ENG-10
Troubleshooting
Problem
Potential Reasons
Power isn't connected
No picture
The power switch
is not on
DVB-T cable not
Screen shows
connected
No Signal
Incorrect setting
No sound from
Sound on mute
speaker
Incorrect sound track
Only sound, no
No or incorrect connection
image on the
with AV cable
screen
The program is a radio
program
Remote Control
The battery is exhausted
is not responding
Remote Control is not
facing or close enough
to the Set Top Box
The image stopped
The signal is too weak
suddenly or mosaic
What to do
Connect the power
Switch on the power
Plug in the DVB-T cable
Reset setting
Turn off mute function
Try another sound track
Make sure cables
are
connected correctly
Press <TV/RADIO> key
to
shift into TV mode
Change battery
Adjust the position
of the
Remote Control and
move
closer to the unit
Strengthen the signal
Werbung
Inhaltsverzeichnis
Fehlerbehebung
