Add-com Quantum Pro ADD100 Sound tube Anleitung Seite 4

Setup
Connecting to your telephone using an amplifier
Some telephones require an amplifier to be connected before a headset will
operate. If this is the case please follow the instructions enclosed with your
amplifier.
Contact your supplier if you are unsure whether an amplifier is required.
Connecting the headset to your telephone
Check to see whether your telephone has a dedicated headset socket.
1
If it does, your headset simply plugs in at this point. In this case your
telephone manufacturer has normally provided a headset button
or headset feature with your telephone. Please refer to your
telephone handbook for further details.
2
If your telephone does not have a dedicated headset socket you
will need to utilize the existing handset socket. Simply unplug the
handset and plug in the headset.
Accessories such as the ADDCOM Multi Purpose Switch (01-00013) allow
you to plug both the headset and handset in simultaneously. Contact your
supplier for more information.
Quick Disconnect (ADDQD)
Your headset is equipped with a ADDQD allowing you to walk away from
your desk without removing your headset, freeing you to multitask.
Before using your headset be sure the two halves of your ADDQD
n
are connected.
To unplug your headset, grasp either side of the ADDQD and pull
n
apart.
To resume your conversation, reconnect the two halves of the
n
ADDQD.
All manuals and user guides at all-guides.com