INTEZZE MOVE Bedienungsanleitung Seite 2

ON/OFF
ATTENTION! Fully charge the earphones together with the case prior to first
use. In order to connect the charging pins, it is necessary to first remove the
protective film from the earphone pins!
Switching ON
The earphones will automatically switch on after removing them from the case
(does not apply to switching on for the first time, when it is necessary to remove
the film - see above). When switching the earphones on manually, hold both
touch areas below the "Z" logo for about 3 seconds.
Switching OFF
The earphones will automatically switch off after inserting them into the case.
When switching the earphones off manually, hold both touch areas below the
"Z" logo for about 5 seconds.
The earphones will switch off automatically if they are not connected to any
device for 5 minutes.
Pairing
Prior to the first use with every device, it is necessary to pair the earphones.
Pairing does not have to be performed again and the earphones automatically
try to connect to any previously paired devices within range.
EN
2