LEM VERONA Bedienungsanleitung Seite 11

7.1. Operator
The table is controlled by an operator through the remote hand control; the operator must position themsel-
ves so as to have complete view of the controlled parts and of the patient.
WARNING! During the functioning of the table the operator should always remain
in the vicinity of the controls; it is forbidden to leave the table unattended during its
operation.
Operators should pay attention to avoid creating potentially dangerous situations for
their own or other's safety.
All the people who work on the table must be properly trained on the correct methods
of work and informed about its proper functioning. They also need to be aware of the
parts of this documentation relevant to their work.
7.2. Use of mattress
In order to ensure hygiene and safety to your patients and ensure long life of the mattress, we recommend
you always cover it with a towel/bed cover and disposable sheets of cartene before starting any treatment.
Both the operator and the patient should not wear rings, necklaces, bracelets, watches or other objects that
may damage the mattress.
7.3. Controls
The table can be controlled by a remote hand control. All controls are maintained action.
A
B
C
D
M1
AUT
* To memorize the position M1 (or M2): position the height, the backrest and the seat in the desired position,
then press simultaneously AUT button and M1 (or M2) button for 1 second.
7. INSTRUCTION FOR USE
PUSH-BUTTON STRIP
A1
Button A: table UP
Button A1: table DOWN
B1
Button B: back rest UP
Button B1: back rest DOWN
C1
Button C: leg UP
Button C1: leg DOWN
D1
Button D: trend position UP
Button D1: trend position DOWN
M2
Button M1: Memorizable position 1
Button M2: Memorizable position 2
Button AUT: automatic return from any position to table
END
position (horizontal and fully lowered) see §7.4
Button END: automatic return from any position to "End of
treatment" positions.
11