finished.
You can press Start/Stop button again to stop the blood
pressure measurement.
Note: While taking measurements, you should remain
still and not squeeze the cuff
3.2.5 After Taking Measurements
The monitor will automatically release the gas in the cuff
once finished taking measurements.
Press the button to turn the power off after taking
measurements. Remove the cuff.
Note: The device has an automatic power shut-off function,
which turns off the power automatically 2 minutes after
taking measurements.
3.3 Recording ECG
3.3.1 Before Taking Measurements
To help ensure accurate measurements, follow these
directions:
Before using the ECG function, pay attention to the
⚫
following points to obtain precise measurements.
.
16