Using The Monitor; Charging The Battery; Blood Pressure Measurement - TrendMedic Viatom Armfit Benutzerhandbuch

3. Using the Monitor

3.1 Charging the Battery

Use the USB cable to charge the monitor. Connect the USB
cable to a USB charger or to the PC. It takes 2 hours to fully
charge. When the battery is fully charged, the indicator will
be off.
The monitor works on very low power consumption, and a
full charge usually lasts for months. A battery symbol, which
indicates the battery status is displayed on the screen.
Note: The device cannot be used while charging.

3.2 Blood Pressure Measurement

3.2.1 Before Taking Measurements
To help ensure accurate measurements, follow these
directions:
Rest for at least 5 minutes before taking
⚫
measurements.
Stress raises blood pressure. Avoid taking
⚫
measurements when stressed.
Remove any tight-fitting clothing from your arm.
⚫
A single measurement does not provide an accurate
⚫
indication of your true blood pressure. You need to
take and record several results over a period of time.
13