Troubleshooting; Possible Cause; Specifications; Technical Support - Midwest i-box Benutzerhandbuch

Troubleshooting

Problem
The unit does not respond
(no power)
No sound
Sound is distorted
Unit becomes warm after
extended play at high volume.

Specifications

Amplifier
Output power
Frequency response
Turntable
Motor
Drive system
Speed
Wow & Flutter
SNR
Cartridge type
Output level
Speaker System
Impedance
Input power
Rechargeable Battery
General
Power requirements
Power consumption

Technical Support

For further help, advice, information or live chat visit www.iboxstyle.com
www.iboxstyle.com

Possible cause

The unit is not connected to the mains
socket.
The mains socket is not switched on or
defective.
No/low volume.
Wrong source selected.
Device not turned ON.
Volume set too low.
Volume level is set too high.
This is normal.
2W
60 TO 20,000 Hz
DC servo motor
Belt drive
331/3 rpm, 45 rpm and 78 rpm
Less than 0.35% (WTD)
More than 35 dB
Ceramic stereo cartridge
1 KHz -600 mV
4 Ω
3W max.
Lithium 1000mAh 3.7V
AC 100/240 V ~ 50/60 Hz
5W max.
Solution
Connect to the mains socket.
Switch on the mains switch or try
another socket.
Adjust the volume level.
Select the correct source.
Turn ON the device.
Press the Volume + button to turn
the sound level up.
Decrease the volume.
Turn the unit off for a while or
lower the volume
Midwest | 07