Carrier 40VCC3 Installations- Und Benutzerhandbuch Seite 13

Operation
(2) Move the cursor to
to be cancelled. Move the cursor to Enter and press the OK key to cancel the weekly timer setting.
C a n c e l
(3) Move the cursor to any set weekly timer No. and press the OK key to modify the weekly timer information.
(4) When there is a repeated or a conflicting weekly timer setting between the new and old weekly timer setting,
press the OK key, and a window will pop up, allowing you to modify and confirm the setting (Figure 3).
This Timing has been set, please revise relevant
parameters.
6. Unit/Group setting:
In the menu interface, press the UP/DOWN/LEFT/RIGHT keys to select the unit/group setting. When the unit/
group setting icon flashes, press the OK key to enter, and the cursor will flash at the smallest unit No. Press
the OK key again, and the cursor will stop flashing and jump to first key on the keyboard,
DOWN/LEFT/ RIGHT keys to move the cursor and press the OK key to select the desired key on the keyboard
and confirm.
and press the OK key to enter the following interface; select the weekly timer that needs
Please select the No. you want to delete.
C a n c e l
(Figure 3)
11
E n t e r
E n t e r
. Press the UP/
x