Dewert RF-Sender BEAM Bedienungsanleitung Seite 19

During the learning phase press the top button of the
approx. 5 seconds
If the drives do not automatically start up as a result of this action, release the
button and press it again. A running drive definitely indicates that the
transmitter
is activated and fully functional.
If activation of the
drives from the mains at the wall socket. Wait for
following the procedure described under
c) Double bed with 2 separate mattresses (2 drives + 2 BEAM RF transmitter)
Put the drive systems into service one after the other. Do
to put several systems into operation simultaneously, otherwise the
drives will be unable to assign the
07/2008 ID-Nr. 58748
.
BEAM RF transmitter
BEAM RF transmitter
has been unsuccessful, unplug the
2 minutes
b) .
BEAM RF transmitter
5 seconds
BEAM RF
, then start again by
2 minutes
not
attempt
clearly.
GB
for
19