Bluetooth Mode - Corsair VIRTUOSO RGB WIRELESS XT Bedienungsanleitung

ENGLISH

BLUETOOTH MODE

> To power on Bluetooth mode, press and hold the MFB for 3-5 seconds. The MFB LED will double blink red until
the headset is paired. To enable pairing, press and hold the MFB until the LED blinks red and blue. When the
headset is paired, the MFB LED will blink blue.
> To power off Bluetooth mode, press and hold the MFB for 3-5 seconds. The MFB LED will turn off.
DISCONNECTED PAIRING
ALTERNATING
DOUBLE BLINK
BLINK
(RED)
(RED & BLUE)
ANSWERING AND ENDING PHONE CALLS
> To answer an incoming call, single press the MFB. To end the call, single press the MFB button again.
LISTENING TO MUSIC (MEDIA PLAYBACK)
> To play a track, single press the MFB. To pause playback, single press the MFB again. To skip forward, press
the MFB button twice quickly. To skip backward, press the MFB button three times quickly.
BLUETOOTH VOLUME CONTROL
> Use the + and – buttons next to the MFB to adjust volume up (+) or down (-).
FOR OPTIMAL WIRELESS PERFORMANCE
> Place the wireless adapter in an open, unobstructed area.
> Make sure the battery is fully charged before initial use.
> Do not leave the battery fully discharged for long periods. Battery life is maximized by keeping the battery in a
partially charged state.
> If RGB lighting effects are unimportant to you, they can be disabled with iCUE to extend battery life.
> Keep the headset at room temperature (20-30°C or 68-86°F).
NOTE: Prolonged listening at high volumes may adversely affect your hearing. Take breaks between sessions
and always begin with the volume at the lowest possible level before increasing.
Volume up
CONNECTED
Multi-function button
SINGLE BLINK
(BLUE)
Volume down
5
SECTION CONTENU DU PACK
A
A — Casque CORSAIR VIRTUOSO
RGB WIRELESS XT
B — Émetteur USB sans fil
C — Câble de charge USB
B C D
F
VIRTUOSO RGB WIRELESS XT
High-Fidelity Gaming Headset with Spatial Audio
D — Pochette de stockage
E — Contrôleur Inline 3,5mm
F — Guide de démarrage rapide
6
FRANÇAIS
E