Max Num/Day
Unlimited – default
1~99 – Optional
i.e.: user chooses 50, then camera will only send photos 50 times every day.
Each time, camera will send to all entered emails/ phones/ FTP accounts. All
the rest photos upon triggers will only be stored in SD card.
SMS Ctrl
Daily – SMS commands sent from the APP will be executed upon next motion
trigger; otherwise camera execute commands based on the Daily Report time.
Recommended setting to reduce battery consumption!
Instant – SMS control is enabled all the time. SMS commands sent from the
APP (including "Get a Picture") will take effect immediately.
Caution! This setting depletes the batteries very quickly, we advise you
to use external power supply or 12V/ 2A DC adapter!
Daily Report
OFF – no Daily Report.
ON – select ON for setting the time when you want camera to send you the
Daily Report.
Daily Report contains: Device IMEI Number, CSQ (Signal Strength) 0~31,
Camera ID, Temperature, Date & Time, Battery Left Volume, SD Card Info,
Total Pics taken by Cam and Send Times.
SIM PIN
You can ignore below description if your SIM card already has been activated,
"Pls enter PIN-Code" will not pop up.
1. Camera will check if inserted SIM card is activated during signal search in
"Test" mode.
2. If SIM is not activated, "Pls enter PIN-Code" will pop up on screen after
signal search.
3. Then "SIM PIN" will turn to be configurable in "4G" page of Menu.
SETUP→MENU→4G→SIM PIN
4. Enter PIN code in "SIM PIN"; camera will auto power off. Camera will
activate SIM card automatically during signal search when you restart the
camera after you enter the PIN code.
Note!
● "Pls enter PIN-Code" will pop up again if wrong PIN code is entered.
● Re-try your PIN code if you see "Pls enter PIN-Code" after signal search.
● SIM is normally limited to 3 attempts then it will be locked. We suggest you
confirm your PIN code before 3
● Insert the SIM card into your phone to unlock it using PUK code if it has
been locked.
Unlimited/ 01-99
Daily/ Instant
ON/ OFF
rd
attempt.