SW-Stahl 23070L Bedienungsanleitung Seite 10

I N S TA L L I N G A B R AC K E T W I T H A D H E S I V E TA P E
Some parking sensor brackets come with very strong adhesive tape. Use a locator pin to precisely
position and glue it on. Before installation, please thoroughly clean and degrease the adhesive point.
Please remember to paint the bracket / sensors before installation if applicable.
I N S TA L L I N G A B R AC K E T W I T H A N A D H E S I V E S U B S TA N C E
Many brackets have to be glued to the inside of the plastic bumper. Before you start gluing the
bracket, please fi rst drill and punch press all required holes in the plastic bumper. Please refer to the
vehicle manufacturer's information to fi nd out which adhesive substance you should use. Based on
the punched-out hole size, please choose the correct holding fi xture. In our example we are using the
green holding fi xture. Assemble them as below:
10