Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Winterizing; Trouble Shooting For Common Faults - Peraqua 7301031 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

FOR INSTALLERS AND PROFESSIONALS

2.4. Maintenance and winterizing

2.4. Maintenance and winterizing
2.4.1 Maintenance
The maintenance should be carried out once per year by qualified professional technician.
The maintenance should be carried out once per year by qualified professional technician.
The maintenance should be carried out once per year by qualified professional technician.
Cut off power supply of the
heat pump before cleaning,
examination and repairing .
Do not touch the electronic
components until the LED
indication lights on PCB turn off.
Please clean the evaporator with household detergents or clean water, NEVER use gasoline,
Please clean the evaporator with household detergents or clean water, NEVER use gasoline,
Please clean the evaporator with household detergents or clean water, NEVER use gasoline,
thinners or any similar fuel.
Check bolts, cables and connections regularly.
Check bolts, cables and connections regularly.
2.4.2 Winterizing
In winter season when you don't swim, please cut off power supply and drain water out of the heat
In winter season when you don't swim, please cut off power s
pump. When using the heat pump under 2 ℃ , make sure there is always water flow.
pump. When using the heat pump under 2

3. TROUBLE SHOOTING FOR COMMON FAULTS

3. TROUBLE SHOOTING
FAILURE
Heat pump doesn't run
Fan running but with
insufficient heating
Display normal, but no
heating
If above solutions don't work, please contact your installer with detailed information and your model number.
If above solutions don't work, please contact your installer with detailed information and your model number.
If above solutions don't work, please contact your installer with detailed information and your model number.
Don't try to repair it yourself.
ATTENTION!Please don't try to repair the heat pump by yourself to avoid any risk.
ROFESSIONALS
turn off.
REASON
No power
No power
Power switch is off
Power switch is off
Fuse burned
Fuse burned
The breaker is off
The breaker is off
evaporator blocked
evaporator blocked
Air outlet blocked
Air outlet blocked
3 minutes start delay
3 minutes start delay
Set temp. too low
Set temp. too low
3 minutes start delay
3 minutes start delay
don't try to repair the heat pump by yourself to avoid any risk.
don't try to repair the heat pump by yourself to avoid any risk.
upply and drain water out of the heat
, make sure there is always water flow.
Important:
Unscrew the water union of inlet pipe
Unscrew the water union of inlet pipe
to let the water flow out.
When the water in machine freezes in
When the water in machine freezes in
winter season, the titanium heat
season, the titanium heat
exchanger may be damaged.
FOR COMMON FAULTS
Wait until the power recovers
Wait until the power recovers
Switch on the power
Switch on the power
Check and change the fuse
Check and change
Check and turn on the breaker
Check and turn on the breaker
Remove the obstacles
Remove the obstacles
Remove the obstacles
Remove the obstacles
Wait patiently
Set proper heating temp.
Set proper heating temp.
Wait patiently
16
SOLUTION
SOLUTION

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis