The Function And Operation Setting - Guzzanti GZ-37 Gebrauchsanleitung

• One piece inner tank allows water filled, but not allows pouring out water by invert
the unit. Keep the shells of the unit drying after rained, not allow dump the unit to
pour out water.
• Although the units has been cleaned before leaving factory, we strongly
recommend to use soft cloth damped with warm water and a little neutral
detergent to clean it again, after that wipe it with dry soft cloth. (warning: electrical
parts can be wiped by dry cloth only).

THE FUNCTION AND OPERATION SETTING.

1) Power supplier: 12/24V DC and 100V to 240V AC
2) Button instructions
ON/OFF: Switching power key
UP/DOWN: Adjust the temperature
SET: press the SET button and chose the cooling mode: ECO (energy saving mode)
& HH (Quick refrigeration mode). Factory default mode is HH
3) Vehicle battery protection system, 3 mode for adjustable, press the SET button 3s,
you can chose the voltage protection range from Hl to
H3.Factory default mode is H3 (high voltage protection).
The car fridge will stop or work in the following voltage range. When the input
voltage reaches the minimum value, the compressor will stop automatically to
protect the battery power. When the voltage returns to the starting value, the
compressor will run normally. Specific parameters of battery protection are shown
in the following table:
4