Care And Cleaning; Troubleshooting - Zanussi ZES3921IBA Benutzerhandbuch

Energy saving
• If it is possible, always put the lids on the
cookware.
• Put cookware on a cooking zone before you
start it.
• Use the residual heat to keep the food warm
or to melt it.
• The bottom of the pans and cooking zones
must have the same dimension.
Examples of cooking applications
Heat Application:
set-
ting:
1 Keeping warm

Care and cleaning

WARNING!
Refer to Safety chapters.
General information
• Clean the hob after each use.
• Always use cookware with clean bottom.
• Scratches or dark stains on the surface have
no effect on how the hob operates.
• Use a special cleaner applicable for the
surface of the hob.
• Use a special scraper for the glass.
Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, and food with sugar. If not, the

Troubleshooting

WARNING!
Refer to Safety chapters.
What to do if...
Problem
You cannot activate or operate
the hob.
14
All manuals and user guides at all-guides.com
• Remove when the hob is sufficiently
Possible cause
The hob is not connected to an
electrical supply or it is connec-
ted incorrectly.
Heat Application:
set-
ting:
2 Gentle simmering
3 Simmering
4 Frying / browning
5 Bringing to the boil
6 Bringing to the boil / quick frying /
deep-frying
dirt can cause damage to the hob. Put the
special scraper on the glass surface at an
acute angle and move the blade on the
surface.
cool: limescale rings, water rings, fat stains,
shiny metallic discoloration. Clean the hob
with a moist cloth and some detergent. After
cleaning, rub the hob dry with a soft cloth.
Check if the hob is correctly con-
nected to the electrical supply.
Refer to the connection diagram.
Remedy
www.zanussi.com