Maintenance And Cleaning - Princess 282990 Bedienungsanleitung

plug into the cigarette lighter socket in
the car or caravan.
The indicator lamp will light to indicate
that the appliance is switched on.
Tapping
See Figure 4.
1 Rinse a glass with clean, cold water.
2 Hold the glass at an angle just under
the tap outlet.
3 Open the tap by tilting the tap handle on
the tap unit quickly towards you.
Ensure that the beer pours into the
glass with a swirling movement.
4 Close the tap by pushing the tap on the
tap unit quickly away from you when the
beer reaches the lip of the tilted glass.
5 Place the glass on the drip tray grille.
6 Take the top of the foam off with a
spatula so that the foam head is level
with the top of the glass.
7 Leave the appliance switched on if you
want to keep the keg cooled for a
longer period.
Cooling
See Figure 5.
As well as tapping beer, the Princess Beer
Cooler is particularly suitable for keeping
products cold. The Princess Beer Cooler
has the capacity for:
• a maximum of 5 bottles, each with a
content of 75 cl, or
• 17 cans, each with a content of 33 cl, or
• 12 bottles, each with a content of 33 cl
and a diameter of 50 mm.
• Ensure that the products have been
cooled before you place them in the
appliance.
1 Remove the cover from the appliance.
2 Slide the cover block into the cover
opening.
3 Slide the supply voltage selector switch
to the required position: 230 V AC or
12 V DC.
4 Connect the 230 V AC cable or the 12 V
DC cable to the associated connection
on the appliance.
5 Push the 230 V AC cable plug into the
wall socket, or plug the 12 V DC cable
plug into the cigarette lighter socket in
the car.
6 Place the pre-cooled products in the
appliance.
7 Place the cover on the appliance.
8 Leave the appliance switched on if you
want to keep the products cooled for a
longer period.
Maintenance
and cleaning
• Do not use any aggressive or abrasive
cleaning agents or sharp objects
(such as knives or hard brushes) for
cleaning.
• Ensure that the appliance is not
plugged into the wall socket or the
lighter socket when you are going to
clean it.
• Never immerse the appliance in water.
• Never put the appliance or the
accessories in a dish washing
machine.
• Ensure that no moisture gets into the
electrical parts of the appliance.
1 Clean the inside and outside of the
appliance with a damp cloth and a mild
cleaning agent. Then thoroughly dry
the inside and outside.
2 Clean the drip tray and grille in warm
soapy water. Then dry them
thoroughly.
3 After each use, rinse the tap pipe on the
keg and the extension pipe with running
water.
4 When fitting a new keg, use a new
extension pipe or clean the extension
Beer Cooler Article 282990
7