Olsson STROOT FLIP Benutzerhandbuch Und Garantie Seite 15

HOW TO DEPLOY THE SCOOTER
Install the foot stand using tools.
1
Press and hold the folding pedal (lower right) by
2
hand and lift the handlebar tube.
Lift the handlebar, and adjust the buckle (lower left)
3
by turning it.
Close the front buckle to stabilize the handlebar
4
(Second safety lock).
The handlebar support, has 2 handles, extend them
5 and insert them on each side, pressing the pivots
until they enter the hole in the handlebar.
The handlebar must be inserted in the bar, adjusting
6
the height depending on the height of the user. It
has 3 levels of height.
Lock the position by closing the hinge. Check that
once closed, the handlebar rotates the wheel. It is
7
very important to verify that the adjustment has
been made.
EN
15