MOUVEX MH6 Schnellstartanleitung Seite 5

Quick Start Guide | SCREW COMPRESSORS – MH6
Speed control (male screw) :
1
(K2)
o
N mini
o
Gear box split position :
2
o
The split selected is locked.
3
o
The speed range used is locked.
4
o
5 Relief valve pressure :
o
6 Control of the opening of the relief valve. (K3, K5)
o
Temperature measurement of the compressor (K3, K4, K5)
7
Run the compressor for 45 minutes at the maximum speed.
•
• Set the pressure to 2.5 bar, measured at point B.
Measure the temperature at points M and F with an eyelet. Temperature < 130°C.
•
Duration
(min)
15'
30'
45'
Stop the compressor
•
o
8 Checking for leaks on the oil circuit.
Check the oil level of the gearbox (according to the manufacturer recommendations).
o
9
Or check the oil level of the PTO for SCANIA and VOLVO.
o
Check the tightness of the oil filter.
10
CONTROL CHECK LIST
Installation Of The Compressor PTO & MH6 Compressor Set
E. Test of the Compressor (K5 connected to B)
N maxi
Caution : Consult the Instructions 1401-AA00 regarding the speed range.
Temperature
Ambient Male Screw (M)
o
Low
o o
2 bar
Female Screw (F)
o
High
o
2.3 bar
B
EN
2.5 bar
M
F
5