Troubleshooting - Sharp HT-SB95 Benutzerhandbuch

6
ū Any obstacle between this unit and a Bluetooth device can reduce
the operational range.
ū If the signal strength is weak, your Bluetooth receiver may discon-
nect, but it will re-enter pairing mode automatically.
1. While in ON mode, press the (Bluetooth) button on the remote
control or on the unit to select Bluetooth mode. The Blue indicator
will light flash.
2. Activate your Bluetooth device and select the search mode.
"SHARP HT-SB95" will appear on your Bluetooth device list.
ū If you cannot find the unit, press and hold the "
on the unit or press the „PAIR" button on the remote control to be
searchable.
3. Select "SHARP HT-SB95" in the pairing list. After the "Paired"
voice prompt, the system is successfully connected and the Blue
indicator will light up solidly.
4. Begin playing music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can:
ū Switch to another function on the unit.
ū Disable the Bluetooth function on your device.The device is
successfully disconnected from the unit after the "Disconnected"
voice prompt.
ū Press and hold the "
/PAIR" button on the unit or press the „PAIR"
button on the remote control.
TIPS:
• Enter „0000" for the password if necessary.
• If no other Bluetooth device pairs with this player in 2 minutes, the
player will reconnect to the previous connection.
• The player will also be disconnected when your device is moved
beyond the operational range.
• If you want to reconnect your device to this player, place it within
the operational range.
• If the device is moved beyond the operational range, when it is
brought back, please check if the device is still connected to the
player.
• If the connection is lost, follow the instructions above to pair your
device to the player again.
Listen to Music from Bluetooth Device
ū If the connected Bluetooth device supports Advanced Audio Dis-
tribution Profile (A2DP), you can listen to the music stored on the
device through the soundbar' .
ū If the device also supports Audio Video Remote Control Profile
(AVRCP), you can use the soundbar's remote control to play music
stored on the device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
ū To pause/resume play, press the "
„PAIR" button on the remote control.
ū To skip to a track, press the / buttons on the remote control.

Troubleshooting

To keep the warranty valid, never try to repair the system yourself. If
you encounter problems when using this unit, review the following
before requesting service.
No power
Ensure that the AC cord is properly connected.
Ensure that there is power at the AC outlet.
Press standby button on the remote control or soundbar to turn the
soundbar on.
No sound
Increase the volume. Press Volume Up on the remote control or on the
right side of the soundbar.
/PAIR" button
/PAIR" button on the unit or the
Press MUTE on the remote control to ensure the soundbar is not
muted.
Press source buttons to select a different input source.
When using either of the Digital input, if there is no audio:
ū Try setting the TV output to PCM or
ū Connect directly to your Blu-ray/other source, some TVs do not pass
through digital audio.
Your TV may be set to variable audio output. Confirm that the audio
output setting is set to FIXED or STANDARD, not VARIABLE. Consult
your TV's user manual for more detailed information.
If using Bluetooth, ensure that the volume on your source device is
turned up and that the device is not muted.
Remote control does not work
Before you press any playback control button, first select the correct
source.
Reduce the distance between the remote control and the unit.
Insert the battery with its polarities (+/-) aligned as indicated.
Replace the battery.
Aim the remote control directly at the sensor on the front of the unit.
I hear buzzing or humming
Ensure all cables and wires are securely connected.
Connect a different source device (TV, Blu-ray player, etc) to see if the
buzzing persists. If it does not, the problem may be with the original
device.
Connect your device to a different input on the soundbar.
I can't find the Bluetooth name of this unit on my
Bluetooth device
Ensure the Bluetooth function is activated on your Bluetooth device.
Re-pair the unit with your Bluetooth device.
This is a 15 mins power off function, one of the ERPII
standard requirement for saving power
When the unit's external input signal level is too low, the unit will be
turned off automatically in 15 minutes. Please increase the volume
level of your external device.