Herunterladen Inhalt Inhalt Diese Seite drucken

Montage; Mounting - Duravit Blue Moon 700143 Montageanleitung

Vorschau ausblenden Andere Handbücher für Blue Moon 700143:
Inhaltsverzeichnis

Werbung

de

Montage

Vor der Installation Badewanne auf mögliche Schäden prüfen.
Boden und Wand am Installationsort müssen eben und fertig gefliest
sein.
1
Ab-/ Überlaufgarnitur montieren.
Den flexiblen Schlauch am Siphon befestigen.
2
Die Wanne auf die Füße stellen.
3
Mit Hilfe der Wannenfüße und einer Wasserwaage die Badewanne
ausrichten. Die Höhe zwischen der Unterkante der Badewanne und
dem Boden muss x mm betragen.
x = Höhe der Verkleidung + 5 mm
4
Die 8 Bohrungen für die Fixierung der Wannenfüße am Boden
anzeichnen. Wanne entfernen.
wARNuNG!
Stellen Sie sicher, dass beim Installieren der
5
Wanne keine Wasserrohre oder elektrische Installationen im Boden
zerstört werden.
Löcher bohren und Dübel einsetzen
6
Wannenfüße am Boden festschrauben.
7
Den flexiblen Schlauch am Ablaufrohr anshließen.
8
Wanne bis zum Überlauf mit Wasser füllen, um die Installation auf
Dichtheit zu prüfen.
9
Verkleidung ausrichten.
Verkleidung an den Magneten des Gestells anbringen.
20
BA_M_BlueMoon #001/08.08.01
en

Mounting

Before installing please check your bath tub for damage (caused during
transport).
The floor and the wall at the site of installation must be level and already
tiled.
Attach the outlet and overflow to the bath tub.
Attach the flexible hose to the siphon.
Place the bath tub on its feet.
Align the bathtub with the help of the feet and a spirit level. The distance
between the sub rim of the bathtub and the floor must be x mm.
x = height of the panel + 5 mm
Mark the position of the 8 holes for the dowels that will fix the feet of the
tub on the floor and remove the bathtub.
wARNING! Make sure that there are no heating pipes or electrical
wires running under the floor which could be affected by the Installation
of the tub.
Drill the holes and insert the dowels.
Screw the feet of the tub to the floor.
Connect the flexible hose to the outlet.
Fill the bath tub to check if the outlet and overflow fittings are water
tight.
Align the furniture casing with the bathtub.
Affix the furniture casing to the magnets of the base frame.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Blue moon 700169

Inhaltsverzeichnis