Specifications; General; Input/Output Ratings; Other - Tascam AE-4D Bedienungsanleitung

Latency setting
6
Set the latency.
Use the following guidelines to change the latency set-
ting.
Selectable Connected network setup guide-
latency value line
The transmission route from the
transmitting device to the receiving
1 msec
device passes through 10 gigabit
switching hub.
The transmission speed of the
2 msec
transmitting device is 100 Mbps.
Use this maximum selectable la-
5 msec tency value when creating a large-
scale network.
ATTENTION
i Changing the name of a device will clear audio routing
settings. For this reason, we recommend changing de-
vice names to names that are easy to identify before set-
ting audio routings.
i Depending on network connection conditions, setting
the latency to a value higher than the guideline might
be necessary.
NOTE
When using a switched (daisy chain) connection, which
does not use a switching hub, set the latency accord-
ing to the number of Dante devices that signals pass-
through as shown below.
Switched (daisy chain) connection example
Passes through 2 devices
Transmitting
1st device
device
Passes through 1 devices
Transmitting
1st device
device
R e c e i v i n g
2nd device
device
R e c e i v i n g
device

Specifications

General

Formats and channels
44.1/48 kHz,16/24-bit, 4 channels
88.2/96 kHz,16/24-bit, 2 channels (double speed)

Input/output ratings

DATA/DATA+PoE connectors
Connector: RJ-45
Transmission protocol: Dante
Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)
Cables: category 5e or faster STP cables
DIGITAL INPUT (AES/EBU) connectors
Connector: XLR-3-31
Input impedance: 110 Ω
Format: AES3-2003/IEC60958-4 (AES/EBU)
Supported sampling frequencies: 32 kHz – 192 kHz
(Sampling rate converter is always on)
DIGITAL OUTPUT (AES/EBU) connectors
Connector: XLR-3-32
Input impedance: 110 Ω
Format: AES3-2003/IEC60958-4 (AES/EBU)
Supported sampling frequencies: 44.1, 48, 88.2 and

Other

Power
PoE class 0
TASCAM PS-P1220E AC adapter (sold separately)
Power consumption
3W
Dimensions
214 × 44.45 × 136.1 mm (W x H x D, including protrusions)
Weight
795 g
Operating temperature range
0°C–40°C
0 See the back of this manual for dimensional drawings
and DSP block diagrams.
0 Illustrations in this manual might differ in part from the
actual product.
0 Specifications and external appearance might be changed
without notification to improve the product.
96 kHz
13
TASCAM AE-4D