Midwest RDH 740021 Installations-, Wartungs- Und Betriebsanleitung Seite 7

2. Run handpiece on Midwest Handpiece Air Station or other air
source until it reaches normal speed. This ensures that the
internal working parts of the motor are completely lubricated.
Wipe off any excess lubricant on outside of handpiece with
dry 2x2 or tissue.
3. Proceed to Bag and Autoclave.
2
Maintenance Using
Midwest Plus
™
Scrub and Rinse
1. Remove prophy cup by holding sheath of handpiece and
rotating cup in counterclockwise direction.
2. Disconnect handpiece from its supply hose.
3. Scrub and rinse external surfaces of handpiece under warm
tap water. Use sponge to scrub.
4. Dry thoroughly using gauze, paper towel or air syringe.
aerosol Spray
6