Vankyo Leisure 430W Benutzerhandbuch Seite 12

Screen Mirroring with the Original USB Cable
For iOS System
1) Turn on the projector, select Scree Mirroring as the input source to enter the interface
of Screen Mirroring for iOS System.
2) Connect your iOS mobile device to the ISB port of the projector with the ORIGINAL
lightning cable.
3) Select Trust in the pop-up window of Trust This Computer.
4) The display of your iOS mobile device will be projected to the wall/screen after a
while.
For Android System
1) Turn on the projector, select Scree Mirroring as the input source to enter the interface
of Screen Mirroring for Android System.
2) Go to the settings of your mobile device, find Developer options, and turn on USB
debugging.
TIP:
The steps to turn on Developer options vary from different models of Android device.
You may check or from internet or contact us for the detailed steps. We take Samsung
Galaxy S8+ as an example.
* Go to settings of your Android device, then tap About phone > Software information >
Built number.
* Continuously tap on Built number for several times until it shows Developer mode had
been turned on.
* Get back to the settings of your mobile device, it will show Developer options.
12