UNI-T UT-203R Bedienungsanleitung Seite 4

• The clamp meter must not be used or stored in
hot temperatures, humid, explosive or flammable
environments or near to strong magnetic fields.
To avoid electric shocks you need to be very
careful when you work with voltage higher than
60 V DC or 30 V AC RMS. Voltages higher than
this pose a risk of powerful electric shocks.
To avoid electric shocks and damage to
the meter, the measuring range limits must not
be exceeded. The guarantee will not apply if
the instrument is used incorrectly.
Symbols
Warning: Risk for potential electric shock. Follow
the instructions in this instruction manual.
Warning: Read the information in this
instruction manual.
AC (alternating current)
DC (direct current)
AC/DC
Low battery warning symbol
Continuity
Diode
Resistance
Capacitance
Non-contact voltage testing
The clamp meter should not be disposed of in
your bin as regular household waste. It should
be taken to your local household waste recycling
centre for disposal in accordance with local
regulations. If you are unsure how to proceed,
contact your local council.
4