RUSTA 907512050101 Gebrauchsanweisung Seite 5

INSTRUCTIONS
GUIDANCE ON FEEDING WATER AND DISASSEMBLE & WASHING OF THE WATER TANK
NOTICE!
• Please clean up water accumulated at the bottom of the water tank in a timely
manner when the product is left unused.
• Please remove the power plug when feeding water and cleaning.
• Please make sure that the water pump module is fixed in position before startup.
Random displacement of the water pump module can cause the abnormalities of
the product in cool wind function.
• Two ways for feeding water:
1. Pull out half of the water tank, and feed water directly without disassembling
the water pump module.
2. Separate water pump module, and fully pull out the water tank, to feed water
or clean the water tank.
1
3
Rotary knob in "—" shape
Unscrew the rotary knob in "—" shape manually
(90° anticlockwise) to separate the water tank
from the water pump module (including the
water pipe).
Pull the water tank
buckle to the horizontal
state.
Water pump module
2
Pull out the water tank
to the position as shown
in the figure (push the
water tank inside after
filling of water).
4
Pull out the water tank
slowly to clean it up or
feed water.
5