Cleaning And Maintenance; Troubleshooting; Environmental Concerns; Battery Disposal - Concept ZA7035 Bedienungsanleitung

EN

CLEANING AND MAINTENANCE

WARNING!
Before each cleaning of the appliance, unplug the power cord from the electrical outlet!
To thoroughly clean the blades on the cutting head, press your thumb against the blades until the head is released. After
cleaning, replace it. You will hear a click when the head is successfully inserted back into the appliance.
Clean the blades after each use with the enclosed brush.
We recommend lubricating the blades after every second use of the appliance. Apply a few drops of oil to the blade
teeth and switch the appliance on to allow the oil to reach the blades.
Do not use hair oil, kerosene oil or solvent containing oil to lubricate the blades. They may slow the blade movement
after drying.
To clean the surface of the appliance, use only a damp cloth, no detergents or hard objects, as they can damage the
surface of the appliance!
Never clean the appliance under running water, do not rinse it or immerse it in water!

TROUBLESHOOTING

Problem Cause
The plug inserted incorrectly or
insufficiently in the wall outlet.
The motor is not working. The wall outlet is not energized.
Damaged power cord.
Poorly adjusted, non-lubricated or
The blades cut badly.
blunt blades.

BATTERY DISPOSAL

The appliance contains a Li-Ion battery. This type of battery contains substances that can damage the environment in
their disintegration. Before disposing of the appliance or replacing the battery, the original battery must be removed
and returned to a suitable collection point.
WARNING!
Never throw the battery into a fire!
Never disassemble the battery!
Never short-circuit the battery terminals!
if leakage occurs when the accumulator is damaged, the electrolyte is of an alkaline character. If the electrolyte gets on
your skin, wash it gently with soap and water and seek medical attention.
Contact an authorized service centre to remove or replace the battery.
48
Remedy
Check connection of the plug.
Check the presence of voltage, e.g. with
another appliance.
Have it checked and repaired by an
authorized service centre.
Unplug the power cord. Check the blade
adjustment and lubricate them. If the cutting
quality does not improve, the blades are blunt
and will need to be replaced with new ones.
ZA7035
SERVICE CENTRE
Extensive maintenance or repair, which requires access to internal parts of the product, has to be performed by
a qualified service centre

ENVIRONMENTAL CONCERNS

• Packaging materials and old appliances should be recycled.
• Packaging materials may be disposed of as sorted waste.
• Dispose the plastic bags made of polyethylene (PE) of as sorted waste.
Recycling of the appliance at the end of its lifespan
The symbol on the product or on its packaging indicates that this product may not be treated as
household waste. It is necessary to take it to a container park for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about recycling of this
product, please contact your local council, your household waste disposal service or the shop where
you purchased the appliance.
The product meets all the necessary requirements of the EU directives applicable to the specific product.
Changes in text, design, and technical specifications are subject to change without notice and we reserve the right to
change them.
ZA7035
EN
49