Manual: ES 100 G
Troubleshooting
Problem
No function / fan not working
Effects don't change to the beat of the music Adjust sensitivity with the dial on the front.
Problems with DMX control
Device not working, but fan working
Technical specifications
•
Power supply: AC 85-250V
•
Ambient temperature: +10°C ... +35°C
•
Power consumption: 40 W
•
Operation modes: DMX 512, automatic, music mode
•
Lasersources: aircooled DPSS laser
•
Optical power (at the laser):min. 50mW, max. 100mW, >50mW 532nm green
•
Beam: ca. 3mm/1mrad
•
Laser class: 3b
•
Scanning system: fast stepper motors ca. 3-8 kpps
•
Weight: 3 kg
•
Dimensions: 23 x 16 x 16 cm (W x D x H)
•
Loudness: <70db
Please note
This device has left our premises in absolutely perfect condition. In order to maintain this condition
and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions
and warning notes written in this user manual.
Laserworld cannot be made liable for damages caused by incorrect installations and unskilled
operation!
This manual is subject to changes without notification. Contact your local dealer for an update, or
check our website www.laserworld.com
For service contact your dealer or Laserworld. Only use Laserworld spare parts
Data subject to change without notice. Errors and omissions expected!
Possible cause
Check mains connection
Check if device isn't in DMX or autom. mode
Check DMX address selection
Turn device off for ca. 1 Minute.
6 / 10
Version: Nov-10