General Notes - IGM Professional FMB300 Bedienungsanleitung

Instruction manual EN
INDEX
Introduction, General Notes and Assembly
Characteristics of the components
Installation and Use
Maintenance and Safety
Information of this publication
This booklet is an integral part of the product. Carefully read the warnings and instructions it contains, as
they provide important indications regarding user safety and maintenance. This manual is used by users
under their own responsibility.
Supplier cannot be held responsible or liable to prosecution for damage due to incorrect use
of the documentation.
Keep this manual in a safe place for any further consultation that may be required.

General notes

This manual was prepared with the intention of providing all the indications regarding technical aspects,
installation, adjustment, use and maintenance.
Data and designs are provided for illustrative purposes. The manufacturer reserves the right to make any
modifi cations to the product without prior notice.
If any further information is required, out technical assistance service should be contacted.
Assembling the set according to the type of hinge
Thanks to the following table, assembling the set is extremely easy.
According to the hinge model, the FMB300 multipurpose support, chuck head, two blind hole bits and
hinge drill bit (code 317.350.11) must be ordered.
Make your set
6
CHOOSE YOUR HINGE
GRASS 42 / 11
BLUM 45 /9,5
MEPLA 48 / 9
SALICE,FGV, DANCO 48 / 6
HETICH, WURT 52 / 5,5
Window handles 43
Dowelling 5x32mm
N.B: Blind hold bits are sold individually, like all the other items, so when ordering, it is necessary to indicate a
quantity of two.
10
Support modular base Boring heads
=
CODE
FMB300
+ +
CODE
FMB4211
FMB4595
FMB4809
FMB4806
FMB5255
FMB4300
3 right, 2 left-handed
FMB3200 drill bit according to
Page
page 10
page 11
page 12
page 13
Drill bits Boring bit
+
CODE CODE
F300-08002
F360-35001
F300-10002
F360-26001
the average
www.igmtools.com