Operating manual EN
3.3 Risks
Even when using the trimmer according to the
manual, there is still some danger.
Danger of a rotating tool. Watch out for cloths or hair
getting stuck.
4. TECHNICAL SPECIFICATION
4.1 Machine Description
1 Main Switch
2 Machine Housing
3 Motor
4 Calibration
5 Quick Release
4.2 Technical parameters
Power
Speed
Router Height setting
Collet
Weight
4.3 Supplied with
Edgeband Trimmer
Plastic Case
Wrenches 13 and 22 mm
Collet 6mm
Radius Scraper
Router Bit R2 mm, S6 mm
4
The tool is sharp, watch out so you do not cut
yourself. Use gloves.
Danger of flying particles. Wear eye protection and a
respirator.
fig. 1
6 Dust Extraction Outlet
7 Safety Cover
8 Router Bit/Cutter
9 Bottom Cover
10 Radius Scraper
5.TRANSPORT, UNPACKING AND ASSEMBLY
5.1 Transport and Unpacking
450W / 230V
Make sure there is no apparent damage caused by
30 000/rpm.
transport, which could have caused damage to the
16mm
machine or your health.
6mm
2kg
5.2 Assembly (compilation)
The machine is supplied assembled. Should you
discover any defects while unpacking, contact your
supplier and do not use it.
www.igmtools.com