Warranty Service; Warranty & Service; Safety; Instructions - IGM Professional 142-PD80 Bedienungsanleitung

2. WARRANTY SERVICE

Warranty is governed by the Terms and Conditions
and Warranty conditions of the company IGM
tools and machines Ltd. The version of which is
available at www.igmtools.com.

3. SAFETY

3.1 Instructions

This machine is intended for work with wood and
wooden materials.
To use the machine properly, adhere to the rules
of operation and maintenance, described in this
manual.
The machine can only be operated by individuals
who are familiar with its operation and maintenance
and are aware of potential risks.
Comply with the minimum age requirement set out
by law.
The machine can only be used in perfect technical
condition.
All security and safety features must be installed,
when in use.
Besides the operating manual, make sure to also
follow the safety guidelines and specific regulations
set out by your country and generally recognized
technical rules regarding operation of woodworking
power tools.
The manufacturer or the supplier will not be held
responsible in case of improper use.
Risks are borne by users.
Should any of these points occur, warranty claims
cannot be applied:
- Unsuitable working environment: high humidity,
squalor.
- Damage caused by improper installation of the tool
or incorrect storage.
- Using a malfunctioning machine.
- Failure to comply with the manual: transport,
storage, installation, operation, cleaning and
maintenance of the power tool.
- Using unauthorized spare parts.
- Unauthorized assembly of the machine.
- Never use worn parts.

3.2 General safety instructions

Power tool may be dangerous when mishandled
Thoroughly read the operating manual and make sure
you understand everything before you start any work
on the power tool.
www.igmtools.com
Operating manual EN
Protect this power tool from dirt and moisture and
when selling the power tool make sure to hand it to
the new owner.
Any changes or rebuilding of the machine is not
allowed.
Daily, before starting work, make sure the machine
and its protection features are functioning. Replace
any identified insufficiencies or faulty safety features.
Turn on the power tool only if it is in perfect technical
condition.
Protect long hair with a hat or a hairnet.
Wear tight-fitting clothing and put aside any
bracelets, rings, necklaces or a tie. Wear work shoes
only. Do not wear casual shoes or sandals in any case.
Follow the personal protection regulations.
Always wear safety goggles. Always use hearing
protection. Make sure you have enough work space.
Do not perform any operations for which this machine
is not intended for.
Secure proper lighting. Make sure that the power cord
is not in the way of your work.
Keep the work area clean. Never touch the power
tool's moving parts when working.
Be attentive and concentrated. Work with reason.
Never work under the influence of intoxicating agents,
such as alcohol or drugs.
Be attentive to the movement of children around a
running machine. Never leave the machine running
without supervision. When leaving your workspace,
always turn the power tool off. Only an electrician may
repair damaged electrical connections. Immediately
replace a damaged cable.
Before connecting to power, make sure the switch is
in the 'OFF' position (turned off ).
Do not use the machine if the switch ON-OFF is
malfunctioning.
Using other accessories than those recommended in
this manual can be dangerous.
Make sure the cable is long enough, is not too tense
or does not fold over an edge.
3