Operating Manual En - IGM Professional FKP101 Gebrauchsanweisung

Operating instructions EN
Pos. # Description
Corps for FKP 101 with bearings
1
Corps for FKP 102 with bearings
Shaft FKP 101
2
Shaft FKP 102
3 Stop ring
4 Spring
5 Setting screw M4x4 (grub screw)
6 Setting screw M4x5 (grub screw)
7 Spring stop FKP101
8 Ring for FKP
9 Imbus key 2
5
fig
. 1.
Description of boring bush FKP101, FKP102
The boring bush is composed of a duralumin centering bush (pos. 1) and a 9 mm diameter shaft (pos.2) with
tightening part for dowel bits. The boring shank is seated in the centering bush bearing to provide maximal
boring precision. The tightening part is secured with a spring (pos.4) and a stop ring (pos.3) fixed by a screw
(grub screw). The boring depth is set by the stop ring, for boring depth range see figure (fig. 2 & 3). The boring
bush FKP101 is for simple boring depth setting equipped with a scale with lines à 5 mm (fig. 2).
FKP101
5-30mm
fig
. 2.
2
FKP101-102 Spare parts list
1
7
5mm
8
3
2
6
4
FKP102
37-45mm
fig
. 3.
v.3
Pieces Code
1
1
1
1
1 FKP101-3
1 FKP101-5
2 FS200 153
1 FS200 115
1 FKP101-7
1 FKP101-8
1 FS800002
www.igmtools.com